Corrugated sheet metal handling has been important since it is applicable for roofs, walls, and interior and exterior wall decoration of industrial and civil buildings, warehouses, special buildings, and large-span steel houses.

If you want to lift a 10-ton steel coil. What lifting equipment came up to your mind first? For steel coil lifters, we suggest lifting magnets that caters to the fierce competition in the market.

For structural fabrication, ferrous metal handling usually is not like one magnet solves all problems. Today let's see this application of lifting magnet for cold rolled steel sheets handling. HVR MAG has always gotten specific problems analyzed in detail to help our customer maximize their value.

We 've heard about material unloading from the cutting table. But have you heard about using lifting magnet for unloading the whole cut sheet metal workpieces from the cutting table at once? In the past, we generally use a lifter for full steel plate loading onto the cutting table. While after cutting, the workpieces’ unloading is usually performed by hand,

As a large enterprise in reefer logistics equipment, our customer has put much emphasis on automation production.

Two domestic customers wanted CNC machine clamps. They used to use mechanical workholding. Now one has the workpiece thickness of 6 mm. How did HVR handle it?

Have you ever tried vertical lifting of steel sheets or plates? This HVR MAG lifting magnet will save you storage space.It lifts steel plates not only vertically, but also horizontally.

Today we are going to address the other big weakness of the electro-permanent magnet by sharing an application case of magnetic grippers for robot arm carrying round bars under the high temperature of 600℃.

Those who deal with magnets should know that high-temperature environments have a demagnetizing effect on the magnetism of magnets. So how does the magnetic gripper for the robotic arm end effector produced by HVR MAG work normally at a temperature of 300°C?