A Brief Introduction to Lifting Equipment for Steel Beam/Profile

A Brief Introduction to Lifting Equipment for Steel Beam/Profile

Here is a brief introduction to lifting equipment for steel profiles, beam blanks, by lifting magnet manufacturer & supplier HVR MAG, for safe and fast handling.

Conventional Lifting Equipment – Lifting Clamps

Many or the vast majority of steel workshops are still using conventional lifting tools to handle steel beams/profiles, like lifting clamps or grabs.

lifting equipment for steel beam - lifting clamps - HVR MAG

The shortcomings of using clamps is that manual clamping of the beam is required, and that the surface of the beam is prone to scratches caused by the clamps. Among all these, the biggest hazard may be that the sudden dropping of beam in the middle of air, jeopardizing the personnel on site.

Magnetic Lifting Equipment – Lifting Magnets

Lifting Equipment for Steel Beam/Profiles - Lifting Magnets - HVR MAG

Magnet lifting for steel profiles, be it steel I beam or H beam. Remote controlled lifting device, offering a series of advantages over lifting clamps:

  • Scratch-free handling of steel beams
  • Tilt lifting available
  • Selective control of magnet lifters for handling beams with varying lengths
  • Electro-permanent magnet technologyfor safe and faster manipulation of steel beam

Features of Magnetic Lifting Equipment

  • Safety factor 3:1
  • PICK UP cycle
  • Landing detection against accidental demagnetize
  • Lamp block for status indication of the magnet
  • Simultaneous 2-button operation to demagnetize
  • Radio remote control
  • Energy Efficient – EPM technology makes only a few seconds use of the electric current, consumes as much as 95% less energy than traditional electromagnets.
  • Maintenance Free – No moving or wearing parts inside

Battery Operated Lifting Magnets – for uses where power supply is unavailable.

Battery operated lifting magnets for steel profile - lifting equipment for steel beam - HVR MAG

Video of steel profile lifting

Application areas of steel beam lifting equipment

  • Loading beam blanksfor machining at a steel mill
  • Storage of beam blanksin a steel distribution warehouse – tilt lifting
  • Machine loading & dispatch of single beams in a steel distribution warehouse

Whatever the application is, or the specific handling requirement is, HVR MAG can custom design & manufacture a suitable magnetic lifting equipment for your steel beams or profiles, to improve your lifting safety and handling efficiency. Visit our website https://www.hvrmagnet.com/ to learn more about us.

You May Also Like

About the Author: hvrmag

发表回复

© 2016 HVR Magnetics Co.,Ltd., is a professional manufacturer of electro permanent magnetic system.