{"id":775,"date":"2021-09-24T03:16:59","date_gmt":"2021-09-24T03:16:59","guid":{"rendered":"http:\/\/www.hvrmagnet.com\/blog\/?p=775"},"modified":"2021-09-24T03:16:59","modified_gmt":"2021-09-24T03:16:59","slug":"considerations-on-selection-of-steel-plate-lifting-equipment-for-cnc-cutting-system","status":"publish","type":"post","link":"https:\/\/www.hvrmagnet.com\/blog\/considerations-on-selection-of-steel-plate-lifting-equipment-for-cnc-cutting-system\/","title":{"rendered":"Considerations On Selection of Steel Plate Lifting Equipment for CNC Cutting System"},"content":{"rendered":"

There’re a lot of things to consider when choosing a proper steel plate lifting equipment, especially loading for cnc cutting in workshop, like the plate handling efficiency<\/em>, how to ensure lifting safety<\/em>, restrictions of power supply in movement<\/em>, guarantee of no damage to the surface of plate during lifting<\/em><\/span>, etc.<\/p>\n

These concerns exist for a reason.<\/p>\n

Take the handling efficiency<\/strong> for example first, how are you gonna improve it if you’re still using conventional lifting tools, like plate clamps or hooks? To lift steel plate with clamps, workers have to separate a sheet from the stack first, then fix the clamps on the plate. It’s too much labor work and time consuming, which lead to low efficiency.<\/p>\n

\"plate<\/p>\n

Some may still use permanent magnetic lifter to do the lifting job. It surely can. But the hand operated lifting device cannot improve the plate loading efficiency too much.<\/p>\n

\"Heavy<\/a><\/p>\n

Then, let’s talk about the lifting safety<\/strong>. Aren’t you afraid that the heavy plate might slip off on you or your staff when lifting with plate clamps\/hooks? Safety first, is the number one rule in any manufacturing workshop or construction site.<\/p>\n

What will happen if the power supply suddenly goes off? With common electric lifting magnets, the suspended heavy steel plate will surely drop as the magnetic force disappears without continuous power supply. However, this will not be the case if lifting with electro permanent lifting magnets.<\/p>\n

Thirdly, the restrictions of power supply in movement<\/strong>. If the power supply for steel plate lifting equipment is unavailable in the workshop, then the choice of equipment is very much limited. Lifting electromagnets work on constant supply of power, so they\u2019re incompetent for use in areas or places where the power supply is limited.<\/p>\n